Fujitsu SRS-1050 manual Setting Up a Conference Call, Dropping Other People from

SRS -1050 Voice Features (	Chapter 2
Setting Up a Conference Call	3. Press CONFERENCE.
After establishing the initial call,	The CONFERENCE button stays
add participants to the conference
	lit to indicate that a conference
call by following these steps:
	call is in progress.
1. Press CONFERENCE.	If you have a conference feature
The CONFERENCE button	for more than three parties, you
lights up. The initial call is	may add more participants to the
placed on hold, and the next	conference, repeating the
available CA is selected.	preceding three steps as many
	times as required up to the
2. Dial the number of the person	maximum number of participants.
you want to add to the
conference.	To add more participants to the
or	conference, repeat the preceding
	three steps as many times as
Select any CA that is ringing or	required up to the maximum
on hold.	number of participants.
∙ If the person answers, you
can talk privately before	Dropping Other People from
joining the conference.
	a Conference Call
∙ If the line is busy or the
person does not answer, press	To drop the last person added,
DROP. Then press the	either press DROP or ask the last
flashing Call Appearance	person added to hang up.
button to return to the initial
call.	Pressing DROP when only two
∙ To retain the second party	participants are connected
	disconnects the call.
without having a conference,
press HOLD and then press
the flashing Call Appearance.
This allows you to speak to
the initial caller while keeping
the second call on hold. To
make this a Conference call,
press the CONFERENCE
button and go to step 3.

Page 2-14