Fujitsu SRS-1050 manual Local Features, Menu Mode Operations

Chapter 3 ( SRS -1050 Local Features

CHAPTER 3

LOCAL FEATURES

This chapter explains how to use the display and softkeys to set the features controlled by the SRS-1050. The first section describes menu mode, from which you make all changes to local features. Subsequent sections describe how to set each feature, in the following order:

∙Programming one-touch buttons

∙Setting the calendar/clock

∙Reinitializing the phone

∙Enabling unanswered call logging (UNA)

∙Selecting handsfree (speaker), handset, or headset operation

∙Setting ringer volume, tone, and operating modes

∙Using Call Announce Intercom

∙Activating or deactivating the MIC-OFF button

∙Choosing an option for how the SRS-1050 selects a Call Appearance button when you go offhook

Note: Options 8 (SPID/TEI) and 10 (KEY-ATTR) in menu mode are installation functions usually performed by your System Administrator or phone maintenance personnel. These options are explained in Appendix B.

MENU MODE OPERATIONS

The SRS-1050 has a menu from which you select options to change SRS-1050 local features.

Note: The procedures to set local features require extensive use of the softkeys located below the display. To see the names of the softkeys, press KEY MENU. The names appear on the second line of the display above the keys. Press KEY MENU again to redisplay the information displaced by the softkey labels. You can use the softkeys any time, whether or not the names are showing.

UNA DATA CLEAR REG

Key Menu

1 2 3 4

Standard Softkey Layout

Some of the data entry screens in menu mode procedures have built-in timers. If you do not enter information within six seconds, the display reverts back to the menu for selecting the feature you were using. You must reselect the feature and start over.

Page 3-1