Fujitsu SRS-1050 manual If you are already talking on another call

Chapter 2 ( SRS -1050 Voice Features

b. Press the button in the handset cradle to get a dial tone.

4.If your call is answered, converse with the called party.

5.When your conversation ends, hang up by replacing the handset in its cradle. Note the displayed call duration; it vanishes after about three seconds.

Note: Onhook dialing. In place of steps 1 and 2, you can dial the number first and then pick up the handset. The phone automatically dials the number. The number you enter remains available for dialing for about three minutes.

You can also use a one-touch button, which automatically selects an idle CA and dials the number. Steps 1 and 2 are therefore unnecessary when you use a one-touch button. Once the call is dialed, you can pick up the handset.

If you are already talking on another call

1.Handle the active call in one of the following ways:

a.End the call by pressing the button in the handset cradle to get a dial tone. (You can also hang up the handset and pick it up again.)

Page 2-3