Fujitsu SRS-1050 manual Hold, Conference

Chapter 2	( SRS -1050 Voice Features
Using REDIAL after lifting the		2. To use another Call Appearance
handset or pressing		or feature button, press it. The
SPEAKER		phone retains each call you
		place on hold until you
1. If you don't hear a tone, press an		reconnect with it (or the other
idle Call Appearance button.		party hangs up). You are now
		free to take other actions,
2. Press REDIAL. The last number		including making and receiving
dialed appears on the display		other calls.
and is dialed automatically.
		3. To reconnect with a call on hold,
		press its flashing Call
HOLD		Appearance button. Its LED
		changes from flashing red to
Retains connection with an		steady red, and you are
existing call until you can		reconnected in handsfree mode.
return to it		(You can use the handset, if you
		prefer, by lifting it.)
HOLD lets you keep a call active
even though you are no longer
directly connected with it. This		CONFERENCE
feature is useful if you need to
perform some action away from		Telephone conferences with
your phone, such as looking up		multiple participants
some information.		Conference is a network-based
The autohold feature		feature that you must subscribe
		to from your telephone company.
automatically puts an active call
		This description assumes that
on hold whenever you press
		you have assigned the
another Call Appearance. You
		Conference feature to one of your
can also press HOLD to manually
		SRS-1050 function buttons.
put a call on hold.
1. To use hold, press HOLD while		The number of conference call
		participants allowed depends on
you have an active call in
		the number specified when you
progress. The Call Appearance
		subscribe to the feature. Ask
LED changes from steady red to
		your System Administrator how
flashing red.
		many participants are allowed on
		your Conference feature.

Page 2-13