Fujitsu SRS-1050 SRS -1050 Voice Features, Chapter, If you are already talking on another call

SRS -1050 Voice Features ( Chapter 2

To turn the microphone back on, press MIC-OFF again; its red LED will go dark.

3.When your conversation ends, hang up by pressing SPEAKER. Note the call duration; it vanishes after about three seconds.

(See also "Handsfree, Handset, and Headset Modes", in Chapter 3, "Local Features".)

If you are already talking on another call

1.Dispose of the active call in one of the following ways:

a. End the call by pressing SPEAKER. Then press SPEAKER and if necessary, press the green-flashing Call Appearance button to answer the incoming call.

or

b. Retain the call by pressing the green-flashing Call Appearance button to answer the incoming call. (The first call is automatically put on hold.)

2.Converse with the calling party. (If the MIC-OFF LED is red, the microphone has been turned off. Press MIC-OFF to turn it back on.) You can turn off the microphone by pressing the MIC-OFF button; its LED will turn red. No sound will then be transmitted to the called party, allowing you to have a private conversation with others in the room. To turn the microphone back on, press MIC-OFF again; its red LED will go dark.

3.When your conversation ends, hang up by pressing SPEAKER. Note the displayed call duration; it vanishes after about three seconds.

4.You may then pick up the call you were originally talking on, if it was held, by pressing its red- flashing Call Appearance button and then pressing SPEAKER.

(See also "Handsfree, Handset, and Headset Modes", in Chapter 3, "Local Features".)

Page 2-8