Fujitsu SRS-1050 ONE-TOUCH Calling, Using a One touch Button to, Make a Call, One-touch Buttons

SRS -1050 Voice Features (	Chapter 2
The CONFERENCE button	ONE-TOUCH CALLING
indicator lights up.
2. An idle CA is selected. Dial the	Pressing a one-touch button
	causes the phone to dial the
number of the person you want
	stored number just as if you were
to transfer the call to.
	pressing the keys on the numeric
The call is put on hold and its Call	keypad. (Chapter 3 explains how
	to set up one-touch buttons.)
Appearance indicator flashes red.
∙ If the person answers, you	Using a One touch Button to
can talk privately before	Make a Call
completing the transfer. To	Just press it. If no other call is
place this person on hold
without transferring the call,	active, the SRS-1050 selects an
press HOLD.	idle Directory Number, turns on
	the speaker and microphone, and
∙ If the line is busy or the	dials the number. (If the MIC-
person does not answer, press	OFF LED is red, the microphone
the button in the handset	has been turned off, so press
cradle (press SPEAKER if you	MIC-OFF to turn it back on.)
are using handsfree mode).	If you already have a dial tone,
Then press the flashing Call
Appearance button to return	then pressing the one-touch
to the original call. To make	button plays back the stored
this a conference call, press	number as if you were dialing.
the CONFERENCE button and
go to step 3.	Dialing Special Codes Using
3. Hang up the handset, or, in	One-touch Buttons
handsfree mode, press	The one-touch feature provides
SPEAKER.
You are disconnected from the	two ways of supplying special
	codes such as credit card
call, leaving the other two parties	numbers, passwords, personal ID
connected.	numbers, and voice mail access
	codes. You can store a code on
	its own one-touch button or you
	can include special codes as part
	of a single one-touch number.

Page 2-18