Fujitsu SRS-1050 manual Redial, 1 Function Buttons, Dials the last number dialed on this phone

SRS -1050 Voice Features ( Chapter 2

DROP

19

TRANSFER

20

HOLD

CONFERENCE

18

REDIAL

SPEAKER

The descriptions below briefly identify each function button. The following pages explain the buttons in more detail.

REDIAL

Figure 2-1: Function Buttons

As a brief overview, the keys do the following:

SPEAKER Enables/disables handsfree operation

REDIAL

Redials the last number you dialed

HOLD

Holds an active call

CONFERENCE

Adds additional parties to an existing call

DROP

Disconnects last party added to a conference call

TRANSFER

Transfers a call to a third party you dial or select

Another function key, MIC-OFF, (described later) is typically active on the multifunction button at the upper-right of the multifunction button array. This key turns the microphone on or off during handsfree operation.

Dials the last number dialed on this phone

This feature is useful if you need to call someone back a second time, perhaps because their line was busy the first time.

Using REDIAL before lifting the handset or pressing

SPEAKER

1.Press REDIAL. The last number dialed appears on the display and is redialed automatically in handsfree mode. Pick up the handset if you want this to be a handset call.

2.If there are no idle Call Appearances available, pressing REDIAL brings the number to the screen but does not dial. When an idle Call Appearance later becomes available, pressing the CA button dials the number in handsfree mode. (Lift the handset, if you prefer.)

Page 2-12