Fujitsu SRS-1050 manual Selection 6 Transfer Key

SRS -1050 Installation ( Appendix B

Note: This step is not necessary if CONFERENCE is assigned to Button 18, using Feature Activator 18 or 60.

1.Assign CONFERENCE as you would any feature activator.

2.In the KEY ATTR MODE, press 5, CONFERENCE, then press

ENTER:

CONF APPEARANCE

SELECT ASSIGN KEY

3.Press selected CONFERENCE button. This screen appears:

CONFKEY = (XX)	FA =
(XX)

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . .

4.Press ENTER. The selected button's LED turns green.

CONFKEY = 18	FA = 18
or 61
COMPLETED

Selection 6: Transfer Key

Note: This step is not necessary if TRANSFER is assigned to Button 20, using Feature Activator 20 or 61.

1.To manually assign the Transfer key for your SRS-1050, press 6, ENTER to view the following display:

TRANSFER REGISTRATION SELECT ASSIGN KEY

Page B-16