Fujitsu SRS-1050 manual Selection 7 Originating DN

Appendix B ( SRS -1050 Installation

2.Press the Multi-assign key #32 (labeled TRANSFER), and the following display is shown.

TRANSFER REGISTRATION
TRANS KEY = (20)	FA=20 or 61

3. Press ENTER.

TRANS KEY = (20)	FA=20 or 61
COMPLETED

Note: If the user selects a key that cannot be used for Transfer, the following display is shown:

SELECT ASSIGN KEY

INVALID SELECTION

Note: The SRS-1050 supports certain new capabilities of National ISDN 97/98. If you wish to assign the following features, the necessary steps are shown below. The SRS- 1050 will operate using default values, if you do not make assignments.

Selection 7: Originating DN

The SRS-1050 supports new ISDN features that allow you to designate lines for originating or receiving calls. This feature works with a complementary switch feature that you can order from your telephone company. It is called Call Appearance Reservation.

Page B-17