Fujitsu SRS-1050 Dropping Out of the, Conference Call Yourself, DMS -100ï, last party added to a

Chapter 2			( SRS -1050 Voice Features
Dropping Out of the				During a conference call, the
Conference Call Yourself				DROP feature allows the
				originator of the call to drop the
Some installations leave the other				last participant added. Other
conference participants				participants can drop out of the
connected if you disconnect.				call simply by hanging up.
Ask your System Administrator
whether your Conference feature				You can use the DROP button
works this way.				repeatedly until you have
				dropped everyone but the
Otherwise, when you disconnect,				participant of the original two -
all other conference participants				party call. To end the call, hang
are disconnected also.				up normally.	ï(
				DMS -100ï
DROP				Warning: Pressing DROP at the
				end of a conference call drops
Cancels connection with the				both participants.
last party added to a
conference call or				Using DROP on a Conference
disconnects call if only two
				Call
participants are connected
(5ESS)				Press the DROP button. This
Drop is a network-based feature				ends your connection with the
that you must subscribe to from				last party you added to the call,
your telephone company. This				but any others on the call stay
description assumes that you				connected. If only two parties
have assigned the Drop feature to				remain, the call is disconnected.
one of your SRS-1050 function
buttons.				The display of the call's duration
Pressing DROP at the end of a				continues until the call is over.
regular call does nothing.		ï
( DMS -100ï				TRANSFER	ï( 5ESSï
Pressing DROP at the end of a
regular two-party call disconnects				Transfers a call to another
the call.	ï( 5ESSï			phone and announces the
				transfer privately
				To transfer a call, follow these
				steps:

Page 2-15