Fujitsu SRS-1050 manual Selecting Ringer Mode, Chapter, SRS -1050 Local Features, Page

Chapter 3 ( SRS -1050 Local Features

4.Press ENTER again and this menu appears:

1:LOW	2:MEDIUM
3:HIGH	(SELECT 1-3)

5.Press the number for the desired tone.

The phone rings once at the selected tone. If you don't like the tone, try a different option.

6.When you hear a tone you like, press ENTER.

The screen shows your selection plus the word COMPLETED:

LOW

COMPLETED

7.To return to the normal display, press REG (softkey 4).

Selecting Ringer Mode

Select either normal ring or silent ring. Silent ring flashes the LED of the receiving Directory Number or Call Appearance button without ringing the bell.

1.Press REG (softkey 4), 7, ENTER (softkey 1). This screen appears:

RINGER SERVICE MODE

. . . . . . . . . . . . . . . . . . . . . . . . . . .

2.Press ENTER again and this menu appears:

1:VOLUME	2:TONE
3:RINGING	(SELECT 1-4)

To see the next menu screen, press NEXT (softkey 2):

4:PATTERN

(SELECT 1-4)

3.Press 3, ENTER. A screen appears showing the current ringer mode setting:

RINGING MODE

BELL

4.Press ENTER again and this menu appears:

1:BELL 2:SILENT (SELECT 1-2)

5.Select 1 for a normal ring or 2 for a silent ring and then press ENTER. The screen shows your selection plus the word

COMPLETED:

SILENT

COMPLETED

6.To return to the normal display, press REG (softkey 4).

To change another setting, you can press asterisk (*) to return to the menu mode options.

Page 3-15