Fujitsu SRS-1050 manual Dial your data SPID number and press ENTER

Appendix B ( SRS -1050 Installation

3.Dial your data SPID number and press ENTER.

If you have no data capability, just press ENTER.

To cancel a data SPID, press CLEAR and then press ENTER.

The display prompts for the D- channel TEI. (If you are on a DMS system, enter the packet TEI.)

ENTER PACKET TEI

ID=0

4.Dial your TEI (valid numbers are from 0 to 63) and press ENTER. Your System Administrator provides the TEI.

If you have no data capability, just press ENTER.

This screen appears:

SPID/TEI ASSIGNMENT

COMPLETED

5.Press REGISTER (softkey 4) to return to normal operations.

Note: For first time installations, download will occur without plugging and unplugging the set.

At initial installation, when you press ENTER, the SRS-1050 automatically requests a download from the switch. This downloading function will work on switches that support parameter downloading and on early versions of the DMS that supports Service Profile Management downloading (SPM). On other switches, manual configuration of features and lines is necessary.

Although each service provider can decide the number of characters and format of the SPID, most have agreed on a simple format. This format, referred to as generic SPID format, is likely the format used by your service provider.

The generic SPID format consists of 14 digits: (10 digit DN) + ( 2 digit Sharing Terminal Identifier) + (2 digit Terminal Identifier).

The first component is the main telephone number of the terminal, including the area code. For example, 9197962000.

Page B-5