Fujitsu SRS-1050 Selection 3 Directory, Number, SRS -1050 Installation, Appendix B, Page B-14

SRS -1050 Installation (		Appendix B
Selection 3: Directory	The set's indicators show button
Number	status as follows:
Your NISDN SRS-1050's first		∙ Green indicates a button
button is set at the factory as		already assigned to a
CA=1. If you subscribe to EKTS		Directory Number.
or Basic ISDN on a DMS NI1, it is		∙ Red indicates a button already
necessary to first clear the CA
		assigned to a network feature
setting. Then you can enter DNs.
		or to a local feature such as
1. Press 1 and ENTER. This screen		one-touch.
appears:		∙ Unlit indicates an unassigned
		button.
CALL APPEARANCE MODE
SELECT ASSIGN KEY	4. Press the button to which you
The first button lower left, lights		want to assign the Directory
green. This is the factory default		Number.
CA=1.
2. Press button 1.	You can press any unlit or green
	multifunction button. If you
3. Press CLEAR (softkey 3),	press a red button, the display
	shows the message INVALID
ENTER (softkey 1). The green	SELECTION and the set waits for
call button will extinguish.	you to press a valid button.
This screen appears:		∙ If you press a green button,
		the display shows the current
		Directory Number assigned to
CA=
		that multifunction button.
COMPLETED
		You can either enter a new
Now that you have cleared CA=1		Directory Number to replace
		the current number or cancel
from your first call button, you are
		the current number.
ready to program Directory
		∙ If you press an unlit button,
Numbers. If COMPLETED still
		the screen looks like this:
appears on the display, press
keypad *, 10, ENTER (softkey 1),
	DIRECTORY NUMBER MODE
3, ENTER.
	DN=	(XX)
This screen appears:
DIRECTORY NUMBER MODE
SELECT ASSIGN KEY

Page B-14