Fujitsu SRS-1050 manual Correcting Mistakes

Chapter 3 ( SRS -1050 Local Features

4.Press ENTER (softkey 1). The associated LED turns green, and the word COMPLETED appears, remaining for 6 seconds.

DN=912229876543 (12)

COMPLETED

5.Complete the procedure in one of these ways:

∙To return to the normal display, press REG (softkey 4).

or

∙To program another one-touch number, press an unassigned multifunction button, then repeat steps 3 & 4. (You can also press a currently assigned one-touch button to change or cancel its one-touch number.)

or

∙To return to the menu mode main menu, press asterisk (*).

Correcting Mistakes

How you correct a mistake depends on where you are in the programming procedure:

∙Before pressing ENTER to record the number, press CLEAR (softkey 3) to erase the number. Then enter the correct number.

∙After pressing ENTER If the number on the COMPLETED screen is incorrect, press the multifunction button again. The ENTER DIRECTORY NUMBER screen appears showing the incorrect number. Enter the correct number and then press ENTER. The correct number appears on the display as you enter it and replaces the incorrect number.

Changing or Canceling the Number Stored in a One- Touch Button

To change or cancel the one- touch number currently stored on

aone-touch button, follow these steps:

1.Press REGISTER (softkey 4), 1, ENTER (softkey 1). This screen appears:

ONE-TOUCH

SELECT ASSIGN KEY

The indicators for previously assigned one-touch buttons will be green.

2.Press the one-touch button whose number you wish to change or cancel. The ENTER DIRECTORY NUMBER screen appears showing the currently assigned number:

Page 3-5