Fujitsu SRS-1050 manual Current Mode Is Primary, 1RINGING 2IDLE 3PRIMARY SELECT, 4NO PREF SELECT

SRS -1050 Local Features ( Chapter 3

If you have an incoming call on button number 1, you are immediately connected to the call. If button number 1 is idle, you get a dial tone. If you are going offhook to retrieve a call on hold on button number 1, you must press the button to reconnect to the call.

To be connected to an incoming call on another button, or to get a dial tone on an idle button, press the button either before or after you go offhook.

∙No preference. The SRS-1050 does not automatically select any Call Appearance button when you go offhook. You must press the button you wish to be connected to either before or after you go offhook.

∙Ringing line preference. The SRS-1050 selects the Call Appearance button that is ringing with an incoming call. If you have more than one incoming call, the SRS-1050 selects any ringing Intercom or Intercom Group feature button first, and then selects the button with the call that has been ringing the longest. You are immediately connected to the call.

∙Idle preference. The SRS-1050 selects a Call Appearance button that is idle, if one is available.

If you have no incoming calls, the SRS-1050 selects the idle Call Appearance with the lowest button number and gives you a dial tone.

To select a Call Appearance preference, follow these steps:

1.Press REG (softkey 4), 13, and ENTER (softkey 1). A screen appears showing you the current preference.

CURRENT MODE IS

PRIMARY

2.Press ENTER to display the preference menu.

1:RINGING 2:IDLE 3:PRIMARY (SELECT 1-4)

To see the next menu screen, press NEXT (softkey 2):

4:NO PREF

(SELECT 1-4)

Page 3-24