Fujitsu SRS-1050 Selection 8 Call Appearance, Reservation, Selection 9 Designated Call, Page B-19

Appendix B			( SRS -1050 Installation
Selection 8: Call Appearance
			4:OFF
Reservation
			(SELECT 1-4)
If you have subscribed to Call			4. Press the number for the desired
Appearance reservation on your			setting, then ENTER.
ISDN line, it is necessary to
assign a reservation status to			CA RESV = TRM	(1)
each CA that is subscribed.
			COMPLETED
1. To manually assign the Call
			Note: If an invalid key is
Appearance Reservation key for
			selected for the CA
your SRS-1050, press 7, ENTER
			Reservation key, the following
to view the following display:
			display is shown.
CA RESV MODE
SELECT ASSIGN KEY			CA RESERVATION MODE
			INVALID SELECTION	(XX)
2. Press the selected Multi-assign
key.			Note: The SRS-1050 supports
			certain new capabilities of
CA RESV MODE
			National ISDN 97/98. If you
CA RESV = ORG		(1)
			wish to assign the following
3. Press ENTER. The following			features, the necessary steps
			are shown below. The SRS-
display is shown. You have the
			1050 will operate using default
option to change the CA
			values, if you do not make
Reservation mode.
			assignments.
TRM =	Terminating Only
ORG =	Originating Only		Selection 9: Designated Call
ORGIP =	Originating and		Appearance
	Priority Incoming Only
OFF =	non reserved		In Selection 5 and Selection 6,
			you assigned CONFERENCE and
1:TRM	2:ORG
			TRANSFER. The SRS-1050
3:ORGIP (SELECT 1-4)
			automatically selects the call
Press NEXT to see the following			button you want to use for the
			third connection of a conference
display.
			or transfer. This button is called
			the Designated Call Appearance
			(DCA).

Page B-19