Fujitsu SRS-1050 Appendix B, SRS -1050 Installation, Page B-13, Feature Activator Mode Fa=Xx

Appendix B ( SRS -1050 Installation

You can press any unlit or green multifunction button. If you press a red button, the display shows the message INVALID SELECTION, and the set waits for you to press a valid button.

∙If you press a green button, the display shows the current feature number assigned to that multifunction button. You can either enter a new feature number to replace the current number or cancel the current number.

∙If you select an unlit button, the screen looks like this:

FEATURE ACTIVATOR MODE

FA=(XX)

XXis the number of the multifunction button you pressed. If you pressed a green-lit button, the current feature number appears after FA=. The new number you enter replaces this number.

3.You now have two choices:

∙ To add or change the feature assignment, enter the feature number you received from the telephone company and then press ENTER.

∙ To cancel the feature assignment, press CLEAR (softkey 3) and then press

ENTER.

The final screen looks like this:

FA=XX(XX)

COMPLETED

If you canceled the current assignment, no numbers appear after FA= and the button indicator goes dark.

4.With your Feature Activator assignment complete, you have these choices:

∙To assign another FA, press the desired button and repeat steps 2 and 3.

∙To return to normal operation, press REGISTER.

∙To make additional button assignments, press asterisk

(*). This returns you to the menu mode main menu.

This completes programming of FAs. If you encounter problems accessing features, review these items for accuracy and check with your service provider.

Caution: If you manually reassign the CONFERENCE button, conference may not work in all cases. If you wish to reassign this button, talk to your System Administrator or service provider.

Page B-13