Fujitsu SRS-1050 manual Setting Ringer Tone, SRS -1050 Local Features, Chapter, Page

SRS -1050 Local Features ( Chapter 3

2.Press ENTER again and this menu appears:

1:VOLUME	2:TONE
3:RINGING	(SELECT 1-4)

To see the next menu screen, press NEXT (softkey 2):

4:PATTERN

(SELECT 1-4)

3.Press 1, ENTER. A screen appears showing you the current volume setting:

RINGER VOLUME MODE

MEDIUM

4.Press ENTER again and this menu appears:

1:SOFT	2:MEDIUM
3:HIGH	(SELECT 1-3)

5.Press the number for the desired volume.

The phone rings once at the selected volume. If the volume is too loud or too soft, try a different option.

6.When you hear a volume you like, press ENTER.

The screen shows your selection plus the word COMPLETED:

MEDIUM

COMPLETED

7.To return to the normal display, press REG (softkey 4).

To change another setting, you can press asterisk (*) to return to the menu mode options.

Setting Ringer Tone

To set the ringer tone, follow these steps:

1.Press REG (softkey 4), 7, ENTER (softkey 1). This screen appears:

RINGER SERVICE MODE

. . . . . . . . . . . . . . . . . . . . . . . . . . .

2.Press ENTER again and this menu appears:

1:VOLUME	2:TONE
3:RINGING	(SELECT 1-4)

To see the next menu screen, press NEXT (softkey 2):

4:PATTERN

(SELECT 1-4)

3.Press 2, ENTER. A screen appears showing you the current tone setting:

RINGER TONE MODE

MEDIUM

Page 3-14