TallyGenicom Intelliprint 8008N Color Laser Printer User Guide
2.6.2 Belt Cartridge
Install the belt cartridge in the printer as illustrated below. Pay attention to the following notes:
Note: Do not touch the photosensitive belt or place it down where it can be scratched.
The photosensitive belt is very sensitive to light. If this belt is exposed to light of 800 lux or more for 2 minutes or more, it deteriorates, causing troubles in the images printed. Pay attention not to expose the belt cartridge to light wherever possible.
Top cover
Protective sheet
Shipping pins
Hold here
Photosensitive belt
1.Open the top cover by raising it. On the right hand side of the printer there is a recess to allow this. Raise the cover until it stays open.
XKeep the top cover fully open during the replacement work.
2.Hold the unit by the exposed black plastic part at the top of the unit. Remove and store the two shipping pins from the new belt cartridge.
3.Remove the protective sheet for the belt cartridge and store it. Pay attention to the follow- ing:
XDo not touch the photosensi- tive belt.
XDo not wipe off any of the white powder adhering to the photosensitive belt.