TallyGenicom Intelliprint 8008N Color Laser Printer User Guide
4.9Interface Menu
The Interface Menu provides access to the printer interface settings. Use the following procedure to enter the interface menu:
1.Press the MENU button on the control panel.
2.Press the NEXT button until the text “Interface Menu” is shown on the second line of the display.
3.Press the SELECT button to enter the Interface menu.
4.Press the NEXT button to move through the submenus: Port, Parallel Setup, Network 1 Setup, Spooling and USB Setup.
5.Use the procedures in the following table to access and change the printer interface settings:
Submenus | Default Setting | Available Settings | Procedure for Changing Setting | |
|
|
|
|
|
Port | Parallel: | Parallel: | 1. | Press NEXT or PREVIOUS to toggle |
This submenu allows | On | On, Off |
| between PARALLEL, NETWORK |
you to enable the type |
|
|
| CARD 1 and USB. |
of interface. | Network Card 1: | Network Card 1: | 2. | Press SELECT to save this setting. |
| On | On, Off |
|
|
| USB: | USB: |
|
|
| On | On, Off |
|
|
|
|
|
|
|
Parallel Setup | Interpreter: | Interpreter: | 1. | Press NEXT or PREVIOUS to scroll |
This submenu allows | Auto Switch | Auto Switch |
| through the INTERPRETER, FORMAT, |
you to set up the |
| PCL |
| MODE, DELAY OUT CLOSE and |
parallel interface. |
| PostScript 3 |
| BINARY PS submenus. |
|
|
| 2. | Press SELECT to choose a submenu. |
| Format: | Format: | 3. | Press NEXT or PREVIOUS to scroll |
| Raw | Raw |
| through the settings. |
|
| Normal | 4. | Press SELECT to choose and save a |
|
| Binary |
| setting. |
| Mode: | Mode: |
|
|
| Bidirectional | Bidirectional |
|
|
|
| Standard |
|
|
| Delay Out Close: | Delay Out Close: |
|
|
| Off | Off |
|
|
|
| On |
|
|
| Binary PS: | Binary PS: |
|
|
| Off | Off |
|
|
|
| On |
|
|
|
|
|
|
|
