Diagnostics

—Parity - None.

—Stop bits - 1.

—Flow control - Hardware.

When the parameters are set, click OK. The HyperTerminal window displays.

i.At the C> prompt, type the user-level password (the default is password) and press Enter. The password is case sensitive. The HyperTerminal window displays with software and hardware version information for the switch, and a C> prompt at the bottom of the window.

j.At the C> prompt, type the displaylog command and press Enter. The HyperTerminal window displays with the event log (from switch NV-RAM) listed.

k.If listed in the REAS column, record the event code 433.

l.Select Exit from the File pull-down menu to close the HyperTerminal application. The following message box appears: