Repair Information

Figure 3–4: Hardware Log

To open the Hardware Log, select Hardware Log from the Logs menu on the navigation control panel.

The log contains the following columns:

•Date/Time - the date and time the FRU was inserted or removed.

•FRU-Position - an acronym representing the FRU or non-FRU element, followed by a number representing the FRU or chassis position. The acronyms are:

—SFP - Small form factor pluggable (SFP) optical transceiver. Chassis slots for SFPs inserted in a port are 0 through 15. The SFPs are FRUs.

—PWR - power supply. Chassis slots for redundant power supplies are 0 and 1. The power supplies are FRUs.

—FAN - cooling fan. Chassis slots for redundant fans are 0 through 5 (cooling fans). The cooling fans are FRUs.

—CTP - control processor (CTP) card. The chassis slot is 0. The CTP card is not a FRU.

—THM - thermal sensor. The chassis slot is 0 (on the CTP card). The thermal sensor is not a FRU.

•Position - a number representing the FRU chassis position. Chassis slots for power supplies are 0 and 1. Chassis slots for fans are 0 through 5 inclusive. Chassis slots for SFPs are 0 through 15.

•Action - the action performed (Inserted or Removed).

•Part Number - the part number of the inserted or removed FRU.