Diagnostics
3
The following table lists event codes, brief explanations of the codes, and associated steps that describe fault isolation procedures.
Event |
|
|
Code | Explanation | Action |
|
|
|
080 | Unauthorized world wide name | Go to step 21 |
|
|
|
440 | Embedded port hardware failure. | Go to step 11. |
|
|
|
504 | Port module failure - error threshold | Go to step 11. |
| exceeded. |
|
|
|
|
506 | Fibre Channel port failure. | Go to step 11. |
|
|
|
507 | Loopback diagnostics port failure. | Go to step 12. |
|
|
|
508 | Fibre Channel port anomaly detected. | Go to step 12. |
|
|
|
512 | SFP nonfatal error. | Go to step 11. |
|
|
|
514 | SFP failure. | Go to step 11. |
|
|
|
581 | Implicit incident. | Go to step 32. |
|
|
|
582 | Go to step 34. | |
|
|
|
583 | Loss of signal or loss of synchronization. | Go to step 32. |
|
|
|
584 | Not operational primitive sequence | Go to step 32. |
| (NOS) received. |
|
|
|
|
585 | Primitive sequence timeout | Go to step 33. |
|
|
|
586 | Invalid primitive sequence received for | Go to step 33. |
| link state. |
|
|
|
|
604 | SBAR module failure. | Go to step 32. |
|
|
|
4
Is fault isolation being performed at the switch or HAFM server?
YES NO
↓Fault isolation is being performed through the embedded web server interface. Go to step 35.
5
Is the amber LED adjacent to a Fibre Channel port illuminated, but not blinking?