Diagnostics

Does the switch appear powered on?

YES NO

↓A power distribution problem is indicated. Go to "MAP 0100: Power Distribution Analysis" on page 2-26.

42

Either a switch-to-PC Internet link problem (Internet too busy or IP address typed incorrectly) or a CTP card failure is indicated.

a.Wait approximately five minutes, then attempt to login to the switch again.

b.At the Netsite field (Netscape Navigator) or Address field (Internet Explorer), type http://xxx.xxx.xxx.xxx, where xxx.xxx.xxx.xxx is the IP address of the switch (obtained in step 1). The Username and Password Required dialog box appears.

c.Type the user name and password obtained in step 1, and click OK. If the View panel does not display, wait another five minutes and perform this step again.

Does the embedded web server interface appear operational with the View panel displayed?

YES NO

↓A CTP card failure is indicated. Go to "MAP 0200: POST, Reset, or IPL Failure Analysis" on page 2-32.

43

At the View panel, inspect the Status field.

Does the switch status indicate Operational?

NO YES

↓The switch appears operational.

44

Inspect the port operational state.

a.At the View panel, click the Port Properties tab. The View panel (Port Properties tab) displays.

b.Inspect the Beaconing and Operational State fields.