Messages
Message | Description | Action |
|
|
|
Could not stop port | Port diagnostics | Retry the operation later. If |
diagnostics. | could not be stopped | the condition persists, contact |
| by the product | the next level of support. |
| manager application |
|
| because the Ethernet |
|
| link is down or busy, |
|
| or because the switch |
|
| or director is busy. |
|
|
|
|
Could not write | A firmware version | Retry the operation again. If |
firmware to flash. | could not be written | the condition persists, contact |
| from the HAFM | the next level of support. |
| server to FLASH |
|
| memory on the |
|
| Director’s CTP2 card. |
|
|
|
|
Date entered is | The date is entered | Verify each entry is valid and |
invalid. | incorrectly at the | consistent. |
| Configure Date and |
|
| Time dialog box. |
|
| Individual field entries |
|
| may be correct, but |
|
| the overall date is |
|
| invalid (for example, |
|
| a day entry of 31 for a |
|
|
| |
|
|
|
Device applications | Port diagnostics | Terminate the device |
should be terminated | (loopback tests) | application and perform |
before starting | cannot be performed | diagnostics again. |
diagnostics. Press | on a port while an |
|
NEXT to continue. | attached device |
|
| application is |
|
| running. |
|
|
|
|
Director must be | The switch or director | Set the switch or director |
offline to configure. | must be set offline | offline, reconfigure |
| prior to configuring | parameters at the Configure |
| Fibre Channel | Operating Parameters dialog |
| operating | box, and retry the operation. |
| parameters. |
|
|
|
|