Event Codes

Port Events (500 through 599)

NOTE: In the Edge Switch 2/16, ports are not included on separate assemblies (UPM cards), therefore are not FRUs. Ports are an integral part of the switch’s main circuit board. UPM card events apply to a single port as indicated by byte 13 of event data.

 

 

 

 

Event Code: 502

 

 

 

 

 

 

 

 

 

 

 

 

Message:

UPM card anomaly detected.

 

 

 

 

 

 

 

 

 

 

 

 

 

Severity:

Informational.

 

 

 

 

 

 

 

 

Explanatio

The CTP detected a deviation in the normal operating mode or status of the indicated

n:

port.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Action:

No action required.

 

 

 

 

 

 

 

 

 

 

Event

Byte 0 = UPM slot position (00 through 0F) (not applicable).

 

 

Data:

Byte 1 = engineering reason code.

 

 

 

 

 

 

Bytes 4 through 7 = elapsed millisecond tick count.

 

 

 

 

Bytes 8 and 9 = high-availability error callout #1

 

 

 

 

Bytes 10 and 11 = high-availability error callout #2.

 

 

 

 

Byte 12 = detecting port.

 

 

 

 

 

 

 

Byte 13 = connected port.

 

 

 

 

 

 

 

Byte 14 = SBAR (not applicable).

 

 

 

 

 

 

Bytes 16 and 17 = high-availability error callout #3.

 

 

 

 

Bytes 18 and 19 = high-availability error callout #4.

 

 

 

 

 

 

 

 

 

 

 

 

 

Distributio

Switch

 

 

HAFM Server

 

Host

 

n:

 

 

 

 

 

 

 

 

 

EWS

System

 

Event

E-Mail

 

Call-Hom

Sense

Link

 

 

 

 

Event

Error

 

Log

 

 

e

Info

Incident

 

Log

LED

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

4

 

 

4