Repair Information

Factory Defaults

Table 3–1lists the defaults for the passwords, and IP, subnet, and gateway addresses.

Table 3–1: Factory-Set Defaults

Item

Default

 

 

Customer password

password

 

 

Maintenance password

level-2

 

 

IP address

10.1.1.10

 

 

Subnet mask

255.0.0.0

 

 

Gateway address

0.0.0.0

 

 

Procedural Notes

NOTE: HAFM and product manager screens in this manual may not match the screens on your server and workstation. The title bars have been removed and the fields may contain data that does not match the data seen on your system.

The following procedural notes are referenced in applicable repair procedures. The notes do not necessarily apply to all procedures in the chapter.

1.Before performing a repair procedure, read the procedure carefully and thoroughly to familiarize yourself with the information and reduce the possibility of problems or customer down time.

2.When performing procedures described in this chapter, heed all WARNING and CAUTION statements, and other statements listed in the preface of this manual.

3.After completing steps of a detailed procedure that is referenced from another procedure, return to the initial (referencing) procedure and continue to the next step of that procedure.

4.After replacing a FRU, extinguish the System Error light-emitting diode (LED) on the front of the switch.