3

Repair Information

This chapter describes the repair and repair-related procedures for the hp StorageWorks edge switch 2/16 (edge switch 2/16), and associated field-replaceable units (FRUs). These procedures are described:

•Obtaining log information at the hp StorageWorks ha-fabric manager (HAFM) server.

•Displaying and using HAFM server views.

•Obtaining and interpreting port diagnostic and performance data, and performing port diagnostic loopback tests.

•Swapping ports (S/390 mode only).

•Collecting maintenance data.

•Cleaning fiber-optic components.

•Powering the switch on and off.

•Performing an initial program load (IPL).

•Setting the switch online or offline.

•Blocking or unblocking Fibre Channel ports.

•Managing firmware versions.

•Managing configuration data.

•Installing or upgrading software.

Do not perform repairs until a failure is isolated to a FRU. If fault isolation was not performed, refer to "MAP 0000: Start MAP" on page 2-7.