To open the Zone Set view, click the Zone Set tab at the bottom of the Fabrics view on the HAFM main window.
Figure 3–10: Zone Sets View
Zone members appear as:
•The unique 16-digit WWN identifying the device attached to the port. If a nickname is configured, the nickname appears instead. For example:
10:00:0206:77:43:B0:1C
•A unique domain ID (1 through 15 inclusive) and port number (0 through 31). For example:
Domain 1, Port 7
The information is also useful for fault isolating E_Port segmentation problems caused by incompatible zone sets. When forming a multi-switch fabric by connecting switches with active zone sets, zone names within the active zone sets should not be duplicated. Names can be duplicated only if the member WWNs of each zone are identical. If two switches have a zone name conflict (duplicate zone names exist), the zone sets cannot merge, the connecting E_Port at each switch segments to prevent the creation of an ISL, and the switches do not form a multi-switch fabric.
