Playback
Where the Advanced Audio option is installed, OmniTek XR has the ability to route any stereo pair of PCM audio channels to the sound output of the system on which OmniTek XR is currently being run. Where OmniTek XR also includes the External Audio option, the sound can alternatively be played back from a pair of AES channels.
To select the stereo pair to play, click on the required pair in the Embedded Audio PPMs display or the AES Audio PPMs display (as appropriate). The selected channel pair is then highlighted to show that it has been selected. You also need to check in the Audio Configuration dialogue associated with the selected PPM window that this channel pair is not set to be decoded as
The sound output used and the volume of this audio output are set by the controls built into the system unit, i.e. under operating system control.
Lissajous Window
Where the Advanced/External Audio option is installed, the phase relationship between a selected channel pair can be displayed as a Lissajous figure in the separate Audio Lissajous window.
This window called up either from the Window menu or by clicking on the Lissajous icon on the main toolbar.
The channel pair used to form the Lissajous figure is selected by clicking on the required pair in the Embedded Audio PPMs display or the AES Audio PPMs display (where appropriate).
OmniTek XR User Guide, Software Release 2.3 | Page 103 |
