Region of Interest Toolbar
The Region of Interest toolbar is a control window that acts in conjunction with the Waveform and Vector Scope windows, and provides fine detail control over the part of the video frame that is used to create waveforms etc. It is described on page 63, alongside the description of the Waveform and Vector Scope windows.
Run (Transport) Toolbar
The Run toolbar is available where OmniTek XR includes the
Transport Controls
Go to 1st frame of the Clip/Sequence
Step back in the clip by one frame
Play the clip in reverse. Note that this reverses the order of the frames, but not the fields.
Stop playing the sequence
Play the clip forwards
Step forwards in the clip by one frame
Go to the last frame of the clip
Enable Loop mode (for playing a sequence)
Frame
The Frame box lets you select an individual frame from the sequence for immediate display.
Play Speed
The Play Speed box lets you choose a playback speed for the sequence. This can be real time, quarter speed, half speed or double speed.
Time Shift (Not offered with dual-link format video)
The following two icons are concerned with the Time Shift feature, which is only active where the system includes the Advanced Option package.
Time Shift provides the useful facility to trigger a video capture only if a specified error condition occurs, and further to record the frames immediately before the event as well as after the event. Captured video can then be reviewed or stored to disk for later review.
Enter Time Shift mode and wait for a trigger.
Time Shift Configuration. This brings up the Time Shift dialogue shown below.
OmniTek XR User Guide, Software Release 2.3 | Page 33 |
