
1. Introduction
This user guide describes the OmniTek XR product. This product consists of a PCI card installed into a Windows PC together with OmniTek software. The product may be supplied already installed and configured by OmniTek, or this may be done by the user. Note however that the installation and configuration of the PCI card and the OmniTek software are not covered here but in the separate PCI Card Installation Guide.
Also available are a
As a
This user guide assumes that you are familiar with basic Windows techniques, such as using a mouse, manipulating window sizes and positions, scrolling etc.
Note: The Advanced Audio option cannot be run at the same time as the
From Power-Up
When the operating system has finished booting, log in if prompted by the system.
After installation, the software will have been installed into c:\program files\omnitek\ omnitek xr. There will also be an OmniTek XR icon on the desktop, plus an entry in the Start menu.
By default, the OmniTek XR application does not
The application offers a range of windows and toolbars. When you exit from the OmniTek XR application, the status of windows and toolbars etc is automatically saved so that the next time the application is opened, the same windows are active and in the same layout as previously used.
User configurable settings are automatically saved in the same way. So for example if the screen was displaying a Waveform window showing RGB data when you exit from the application, OmniTek XR will open with a Waveform window showing RGB data the next time it is run. (The details are stored as startup_nnn.ods, where nnn indicates the slot and bus number of the OmniTek card.)
Note: None of these settings will be saved if the machine on which OmniTek XR is being run is simply turned off.
OmniTek XR User Guide, Software Release 2.3 | Page 7 |