Removing the ribbon cartridge
●To remove the ribbon cartridge, press the cartridge grips inward and lift the cartridge upward out of the printer.
Installing the roller unit
●Open the rear cover by pushing the cover grips backward and upward.
●Pick up the roller unit so that the small illustration is on top of the roller unit, and the smoked plastic side (with six small black rollers) is facing you.
●Hold the roller unit so that the top is tilted slightly away from you.. Slide the hooks on either side of the back of the roller unit over the platen (the large black roller) and under the silver bar behind and above the platen. The hooks should both be between the metal plates at either end of the silver bar.
Page12
