is narrowed (thin paper), and if you pull it towards the
front, the gap is widened (thick paper).
As you move the lever, you can feel it click between the
six different positions. Position number 2(starting from
the rearmost position) is the one you will generally use
for single sheets of paper (fanfold or cut sheet). Here is a
table for the adjustment lever when you use multi-part
sets.
Paper Weightof each Thickness Recommended
type sheet leverposition
‘total‘n ‘m) (1 =rearmost)
Sincjle 14to 24 Ibs (52 to 90 gsm) 007to0.12 2or 3
2-part 11to 14 Ibs (40 to 52 gsm) 0.12 to 0.14 2or 3
3-part 11to 14 Ibs (40 to 52 gsm) 0.18 to 0.21 3or 4
4-part 11to 14 Ibs (40 to 52 gsm) 0.24 to 0.28 4or 5
5-part 11to 14 Ibs (40 to 52 gsm) 0.30 to 0.35 5or 6
Note: Ifyouusemulti-partsets,setuptheMulti-Partsettingusing
theElectronicDIPswitchesasdescribedin“B5and B6-Multi-
partmode”onpage58.
Page25