I

U t E

D s

l

To use the Electronic DIP Switch mode, turn the printer OFF.

Press and hold down the I

the

and the (@RTiNE]buttons.

 

Turn the printer on while holding down these but- tons. Wait a few seconds and release them.

The display will show:

R]. 0“

EDS

This means that we are in Electronic DIP Switch mode, that switch number 1 of bank A (switch “Al”) has been selected, and it is now ON.

Banks and numbers

Conventional DIP switches are arranged in banks. Each bank contains a number of different switches. If the LC24-300 Colour had conventional DIP switches, this is how they would look:

A B C D E F

As it is, the LC24-300 Colour switches are represented on the front panel.

Selecting the switch bank

To select a switch bank in Electronic DIP Switch mode, press the [T6FR_button]. With each press of the [~] button, the display will change from “A” to “B”, through “F”, and back to “A” again. If you have selected a switch number other than “l“, the number will be changed to “1“ when you go to the next bank.

Page53

Page 61
Image 61
Star Micronics LC24-300 user manual Banks and numbers