Star Micronics LC24-300 user manual Page56

*

Yc

~		Function	Meaning	Meaning
			when ON	when OFF
		“g
		to
D	5	CR centering	Disabled	Enabled

E1

E 2

E	3	LQ font selection	See “Elthrough E5 - LQ Font selection”
			on page 61.

E4

E 5

F	1	Electronic DIP	User settings	Default (factory)
		Switch setting		settings

Note that:

. All “switches” are ON when they leave the factory except for A5 (Auto CR-LF). Setting F1 to OFF will set all switches to ON, except for A5.

●If switch F1 is set to OFF, the changes made to other switches will have no effect. All switches will be reset to factory settings.

. You should not change the setting of switch B4.

M o t s e

A 1- Emulation

kThis switch determines what printer the LC24-300 Colour emulates (pretends to be). When ON, the LC24- 300 Colour emulates an Epson LQ-860, and when OFF, the LC24-300 Colour emulates an IBM Propnnter X24E.

A2 - Auto Emulation Change( m

If this switch is ON, the LC24-300 Colour will automati- cally change between the two emulations above, depending on the data received. If this switch is OFF, the printer will stay in whatever emulation you have selected with Al.

Page56