Star Micronics LC24-300 user manual Adjusting the print gap

Where you can print on each kind of paper

Fanfoldforms	Single sheets
5mm	5 mm
18 mm
	5 mm

Perforation

Bottom of .		81 mm	o
Form	0		0

If you print outside these limits, you run the risk of damaging the printer mechanism (and tearing the paper or jamming it as it goes through the printer).

Adjusting the print gap

Note: Important.Ifyoudo notadjusttheprintgapproperly,yourun

theriskof shorteningthelifeoftheprinthead.

Different paper thicknesses need a different gap between the print head and the paper. The LC24-300 Colour allows you to make six different settings, using the adjustment lever at the left of the printer. If you push this lever towards the back of the printer, the gap

Page24