interference from nearby electrical devices or by a low level of humidity is affecting the printer’s operation.
Make sure the printer is not too close to any devices with electric motors, or raise the humidity level.
Inappropriate settings have Choose different settings in
been selected from your your application. application program.
P c
The wrong emulation is selected.
The wrong character table, code page or international character set is selected.
Static electricity caused by interference from nearby electrical devices or by a low level of humidity is affecting the printer’s operation.
Inappropriate settings have been selected from your application program.
There are wires missing from the print head.
Action
Check the emulation selection. See “AIL Emulation” on page 56.
Check Electronic DIP Switch settings. See “D2 through D4 – character code tables” on page 60.
Make sure”~hatthe printer is not too close to any devices with electric motors, or raise the humidity level.
Choose different settings in your application.
Return the printer to your dealer for repair.
