Sethorizontaltabstops
IMODE IAscll \Detjmal IHexadecimal I.
Both <ESC> “D” n27 68 n] IB 44 nl
n2 <O> n2 ... 0 nz .00
Cancels all current horizontal tab stops and sets new
tab stops at columns nl, n2, etc. in the current charac-
ter pitch (pica pitch if proportional spacing is currently
selected), where nl, n..Z,etc. are numbers between 1and
255. The maximum number of horizontal tab stops
allowed is 32 in Standard mode and 28 in IBM mode.
The tab stops must be specified in ascending order; any
violation of ascending order terminates the tab stop list.
Standard termination is by the <0> control code. To
clear all tab stops, speci~ <ESC> “D” cO>.
Reset-alltabstops
MODEASCII
Decima
Hexadec
,
IBM <ESC> “R” 27 82 IB 52
Resets the horizontal tab stops to their power-up values
in which atab stop is set every 8columns starting at
column 9. ASO clears all vertical tab stops.
Horizontaltab
MODE
ASCIIDecima
Hexadec
Both <HT
909
Moves the print position to the next horizontal tab stop.
Ignored if there is no next horizontal tab stop on the
current line. Note that when underlining is selected,
spaces skipped by horizontal tabulation are not under-
lined.
Page119