Message
;
P
E
~
ON
OFF
El!IEa
PI?
P
lid
bc
d&!
Meaning
I
1
The optional cartridge LQ font has been selected
The zoom mode has been selected. The message below indicates the current size.
The current pitch size. The message below indicates the current size.
The electronic DIP switch mode is selected (see page 53)
Font changes cannot be made from application pro- grams. See “Fontlock” on page 45.
Changes to the font pitch cannot be made from applica- tion programs. See “Pitch lock” on page 45.
Displayed in Electronic DIP Switch mode to show the status of the
The quiet print mode is selected. See “Quietprinting” on page 37.
The front panel settings have been saved as a macro. See “SavingMacros” on page 42.
The short test mode has been selected. See “Short test” on page 47..
The long test mode has been selected. See “Long test” on page 47.
The print area test mode has been selected. See “Print area test mode” on page 48.
The hexadecimal test dump mode has been selected. See “Hexadecimaldump mode” on page 49.
Top of form is being set manually with the control panel. See “Settingthe top of a form” on page 35.
The buffer has been cleared manually wilh the control panel. See “Clearingthe buffer” on page 43.
Dot adjustment mode has been selected. See “Adjust- ing the dot alignment” on page 50.
Page86
