Star Micronics LC24-300 user manual Pitch unlock

● While holding down the [~] button, turn the printer on again.

. Keep holding down the [~) button until the printer beeps, and the display shows m.

You can put the printer in not-readymode and change the pitch using the [FE@ button (“Changing the pitch of the font” on page 39). Any software commands from your computer that try to change the pitch will be ignored by the printer.

Pitch unlock

Reset the printer. See “Setting the printer back to default settings” on page 44. This will also reset the font lock (see above).

Pitch and font lock

This stops you from accidentally changing the font and/ or the pitch with software commands.

. Turn the printer OFF (front switch).

. Press and hold down the [T6NY]button and the [~] button.

●While holding down the [~) button and the (~] button, turn the printer on again.

● Keep holding down the [*] and [7%EK’buttons until the printer beeps, and the display shows both _ and _

You can put the printer in not-readymode and change fonts and pitch using the [m) button and the [~] button (“Selecting the different fonts” on page 38). Any software commands from your computer that try to change the pitch or font will be ignored by the printer.

Pitch and font unlock

Reset the printer. See “Setting the printer back to default settings” on page 44. This will reset the pitch lock and the font lock.

Page46