Star Micronics LC24-300 user manual Parking paper

tractor pins. If the holes and pins are not correctly

lined up, you may find that the paper tears and jams.

Note: Ifthepaperistootightlystretchedortoo loosebetweenthe

pinholders,thepaperwilltearorjamasit isfedthroughthe

printer.Youmayneedto experimentto findtheidealtension.

●Replace the roller unit (see “Installing the roller unit” on page 12).

●Replace all the covers that you have removed.

●Turn on the printer.

●Put the printer into not-readymode (use the [~] button) ‘ad use the [PAPER FEED] button to advance ‘the paper so that the print head is just below a perfo- ration. Put the printer into ready mode again.

Parking paper

Paper parking allows you to print single cut sheets even when fanfold paper is loaded. The fanfold paper is tem- porarily “parked” out of the way while the cut sheet is fed through the printer.

Note: Youcanonlyusethepaper@rking functionwhenfanfold

paperisloadedfromtherear.Youcannotuseitwhenyouare

feedingfanfoldpaperfromthebottomslot.

. The power should be ON. The release leaver should be pulled forward ( ~ ) and the fanfold paper loaded.

. Put the printer into not-readymode (use the [~] button).

. Tear off the last page of the fanfold paper. If the paper is not in a suitable position to be torn off, use the [PAPER FEED) button to feed the paper forwards to a

suitable position.

Page31