Chapter 7: Configuring & Maintaining Your System
Primary Master Submenu (Figure 7.2)
This menu allows you to adjust the settings for the hard disk drive. Unless you are an experienced user, you should allow the settings to be Auto- Detected by setting this item to “Auto”.
Figure 7.2: The Primary Master Submenu
PhoenixBIOS Setup Utility
Main
Primary Master Submenu
Primary Master [TOSHIBA
Type: | [Auto] |
| LBA Format |
Total Sectors: | 19640880 |
Maximum Capacity: | 10056MB |
[16 Sectors] | |
LBA Mode Control: | [Enabled] |
32 Bit I/O: | [Enabled] |
Transfer Mode: | [Fast PIO 4] |
Ultra DMA Mode: | [Mode 4] |
Item Specific Help
All items on this menu Cannot be modified in user mode. If any items require changes, please consult your system Supervisor.
F1 Help ESC Exit
➔ ➔
➔
➔
Select Item Select Menu
F5/F6 | Change Values | F9 | Setup Defaults | |
Enter | Select | F10 | Save and Exit | |
7.5
