Series User’s Manual
If you choose to enable the password, be sure to write down the password
Figure 7.7: The Security Menu
PhoenixBIOS Setup Utility
Main | Advanced | Security | Boot | Exit |
and store it in a safe place. If you ever forget this password, you will be unable to use the system or change the BIOS set- tings. You will need to return the unit to WinBook to restore full functioning to the system in this event.
Supervisor Password Is: | Clear |
User Password Is: | Clear |
Set Supervisor Password | [Enter] |
Set User Password | [Enter] |
Diskette access: | [Supervisor] |
Fixed disk boot sector: | [Normal] |
Virus check reminder: | [Disabled] |
System backup reminder: | [Disabled] |
Password on boot: | [Disabled] |
Item Specific Help
Supervisor Password con-
trols access to the setup
utility.
F1 | Help | ➔➔ Select Item | F5/F6 | Change Values | F9 | Setup Defaults |
ESC | Exit | ➔ ➔ Select Menu | Enter | Select | F10 | Save and Exit |
|
|
|
|
|
|
|
User Password Is: This item displays the current status of the User
Password: Set or Clear.
Set Supervisor Password: This item allows you to set or clear the super- visor password. If the supervisor password has been enabled, you will need to log in as the supervisor to clear or change the password. Press [Enter] to set or clear the password.
•To set the password, enter a password in the space provided. Press [Enter]. Type the same password again (to provide verification of the password) in the second line and press [Enter]. The password will
now be set.
7.12
