Winbook X2 manual Problem I can’t hear sound from the built-in speakers

Chapter 8: Troubleshooting

turned up. Press and hold the [Fn]+[F8] hot key combination to increase system volume.

•Check that Mute is not enabled. Press [Fn]+[F6] to toggle the Mute setting.

•Are the headphones connected? Make sure the cord is plugged into the external speaker jack. The audio jacks are on the rear of the system; the headphone jack is to the left as you face the rear of the system.

•Are you using the correct connector? The WinBook notebook’s external speaker connector is compatible with a 3.5mm stereo audio plug. If you are using a different plug, it may not be compatible.

•Inspect the cord for wear or damage. Usually you will find this at the ends of the cable where connectors are attached. If you find damage to the cord, repair or replace the cord, then try again.

PROBLEM: I can’t hear sound from the built-in speakers.

ACTIONS:

•Check the volume level. Double-click on the speaker icon on the taskbar to be certain that the system volume and other volume settings are turned up. Press and hold the [Fn]+[F8] hot key combination to increase system volume.

•Check that Mute is not enabled. Press [Fn]+[F6] to toggle the Mute setting.

•If you have external speakers or headphones plugged into the WinBook notebook, the built-in speakers are automatically disabled. Try unplug- ging external speakers or headphones to see if the audio is restored to the built-in speakers.

8.3