Allied Telesis AT-8600 manual Reset qos portgroup counters, Set qos policy, Software Version 133

Software Version 2.8.1 133

reset qos portgroup counters

Syntax RESET QOS PORTGroup=group-listCOUnters

TRafficlass[={trafficclass-listDEFaultALL}]

Description This new command resets traffic class counters for a port group. Use the set switch enhancedmode command in the Switching chapter to set counters.

Parameter	Description
PORTgroup	Port group for which you want to clear counters. The group-listconsists
	of:
	• one or more port groups
	• a range specified with a hyphen, such as 1-4
	• a comma-separated list of numbers and/or ranges
	• an integer from 1 to 32
	Default: no default
TRafficclass	Traffic class counters to clear for this port group.
	Default: all
	trafficclass-listSpecific traffic class that consists of:
		• one or more traffic classes
		• a range specified with a hyphen, such as 1-4
		• a comma-separated list of numbers and/or ranges
		• an integer from 0 to 1023
	DEFault	The default traffic class.
	ALL	Resets counters for all traffic classes attached to the
		port group. Also resets all of them if you enter no
		value.

Example To reset all traffic classes configured on port groups 1, 2, 3, 4, use the command:

reset qos portg=1-4 cou tr

set qos policy

Syntax SET QOS POLIcy=id-list[dtcstormstatus={enabledisable}] [dtcstormwindow={windowsizenone}] [dtcstormrate={ratenone}] [dtcstormaction={linkdownportdisable}] [dtcstormtimeout={timeoutlengthnone}]

[other-parameters]

Software Version 2.8.1 C613-10477-00 REV B