Allied Telesis AT-8600, RAPIER I, X900-48FE, AT-8900 manual Show ip counter, When the entry is used

Software Version 2.8.1 77

Table 16: Parameters in output of the new show ip cache command (cont.)

Parameter	Meaning
Type	One of the following:
	Forward
	Local
	GenBcast
	SpcBcast
	MultOsp
	MultLmtd
	MultNorm
	MultLocl
Age	Age of the entry, which increases over time, but is reduced
	when the entry is used.
Count	Number of times the entry was found.

show ip counter

Syntax SHow IP

COUnter[={ALLARPCACheICmpINterfaceIPMUlticastROu tesSNmpUDp}]

Description This command displays all or selected parts of the IP MIB. You can now specify cache as an option for the counter parameter. If all is specified or no option, then all IP counters are displayed. The MIB can be selectively displayed by specifying one of the options in the syntax.

Figure 19: Example output from the show ip counter=cache command

Cache Counters
hits	304 rejects	0
deletes	0
Table 17: Parameters in output of the show ip counter=cache command
Parameter	Meaning
hits	Number of times that an entry was found in the cache.
rejects	Number of times that an entry could not be added to the
	cache.
deletes	Number of entries removed from the cache before they
	timed out.

Software Version 2.8.1 C613-10477-00 REV B