Allied Telesis AT-8900, RAPIER I, X900-48FE manual Show qos portgroup, QoS EnhancementsRelease Note

138 QoS EnhancementsRelease Note

Example output from the show qos port=1 command

QOS Port Configuration
Port	1
Port Group	1
Trunk Group	None
Policy Assigned	1(all ports)
Default Queue	2
Force Default Queue	No
Red Curve	2
.
.
.

New parameters in output of the show qos port=1 command

Parameter	Meaning
Port Group	ID of the port group to which the port belongs.
Trunk Group	ID of the trunk group to which the port belongs.

show qos portgroup

Syntax SHow QOS PORTGroup[={group-listALL}]

Description This new command displays information about port groups.

Parameter	Meaning
PORTgroup	Specifies a port group for which to display information.
	Default: all
	group-list	Integer from 1 to 32 (Figure 41, Table 33).
	ALL	All port groups.
	no value	Displays summary information about all port groups
		(Figure 40, Table 33).

Figure 40: Example output from the show qos portgroup command

QOS	Port Group Information
ID	Description	Policy Assigned	Ports

-----------------------------------------------------------

1	Uplink	None	1-2,5
2		1	10-20

Figure 41: Example output from the show qos portgroup=1 command

Identifier . . . . . . . . 1

Description . . . . . . . Uplink

Policy Assigned to . . . . None

Ports . . . . . . . . . . 1-2,5

Software Version 2.8.1 C613-10477-00 REV B