Allied Telesis AT-8600, RAPIER I, X900-48FE, AT-8900, AT-8700XL, AT-9900 Load, Software Version 149

Software Version 2.8.1 149

load

Syntax LOAd [METhod=SCP] [DELay=delay] [DESTFile=destfilename] [DEStination={CFlashFLashNVs}] [{FIleSRCFile}=filename]

[{KEYid=key-idPASSword=password}]

[SErver={hostnameipaddipv6add}] [USERName=username]

Description The new method=scp option allows you to download a file using Secure Copy.

Parameter	Description
METhod	The method used to download the file. When scp is specified, Secure
	Copy is used.
	Default: tftp or the method set in the set loader command
KEYid	The ID number of a RSA private or public key that is held on the router
	or switch. The server receiving the load request must have the public
	key for this authentication to work. The key-idis a decimal number
	from 0 to 65535.
	Default: no default
PASSword	The password for server authentication, if RSA authentication is not
	being used. This can be between 1 to 60 characters long. As the
	password is typed it appears as plain text on the screen, so it should
	only be used in a secure area.
	Default: no default

Example In this example, the router or switch is downloading the file abc.cfg from a SCP server with the IP address 172.16.8.5. The user has the username “john” and the password “secret” on the server. To download the file and save it as abc.cfg in flash memory, use this command:

loa met=scp fi=/downloads/abc.cfg se=172.16.8.5 des=fl usern=john pass=secret

Software Version 2.8.1 C613-10477-00 REV B