Allied Telesis AT-8800, RAPIER I manual Reset file permanentredirect, Show file permanentredirect

Software Version 2.8.1		23
	Parameter	Description (cont.)
	LIMIT	A decimal number from 0 to 1048 576 bytes specifying the maximum
		file size.
		Default: 204 800 bytes

Example To permanently direct all debug output from the BGP module to a file named bgp.txt, use the command:

cre fi=bgp.txt com="enable bgp debug=all" perm

reset file permanentredirect

Syntax RESET FIle[=filename] PERManentredirect

Description This new command closes one or all text files so that they no longer receive input from commands or scripts. After the file closes, it can be uploaded or edited

Parameter	Description
FIle	Name of the text file to close. If no file is specified, all text files are
	closed.
	The filename is in the format [device:]filename.txt and can be:

• uppercase and lowercase letters

• digits

• # $ % & ! ' ( ) + , - . ; = @ [ ] ^ _ ` { } ~ and space

device indicates the physical location where the file is stored. The default is flash.

Default: no default

Example To reset the bgp.txt file so that it no longer receives output from the enable bgp debug=all command (previously set), use the command:

reset fi=bgp.txt perm

show file permanentredirect

Syntax SHow FIle[=filename] PERManentredirect

Description This new command displays information about one text file or all that are permanently receiving output from commands or scripts (Figure 3, Table 2). These files are typically created to collect data during debugging.

The file parameter displays information about a specific text file (Figure 4). The filename option is in the format [device:]filename.txt and can be:

■uppercase and lowercase letters

■digits

■# $ % & ! ' ( ) + , - . ; = @ [ ] ^ _ ` { } ~ and space

Device indicates the physical location where the file is stored. The default is flash.

Software Version 2.8.1 C613-10477-00 REV B